Vertical machining centre
QUASER MV184 P
- Operating range up to max. 1000 mm x 500 mm of 450 mm height
- 4. axis machining with an additional rotary head
- Internal cooling through the spindle enables the production of holes and grooves of greater depths
- A 3D sensor enables precise measurement of products even during processing
Vertical machining centre
DOOSAN DNM500
- Operating range up to max. 1020 mm x 500 mm of 400 mm height
- Internal cooling through the spindle enables the production of holes and grooves of greater depths
Vertical machining centre
AKIRA SEIKI SV1050
- Operating range up to max. 1020 mm x 500 mm of 400 mm height
- Internal cooling through the spindle enables the production of holes and grooves of greater depths
- The high spindle speed enables quick processing of aluminium
Vertical machining centre
AKIRA SEIKI V3XP
- Operating range up to max. 800 mm x 400 mm of 400 mm height
- 4-axis machining with additional rotary head
- Internal cooling through the spindle enables the production of holes and grooves of greater depths
Two-palette vertical machining centre
DOOSAN VC430
- Operating range up to max. 700 mm x 400 mm of 400 mm height
- Internal cooling through the spindle enables the production of holes and grooves of greater depths
- Automatic pallet changing enables continuous operation without stopping to change the workpieces. The machine is suitable for batch processing of large quantities
Horizontal machining centre
AKIRA SEIKI H300
- Operating range 350 mm x 350 mm
- High speed for aluminium processing
- Extremely fast machine strokes
- 4-axis enable processing the product from several sides in one clamping
- The pallet changer allows fast production without delay due to product change
5-axis machining centre
DMG DMU50T
- Tooling machine for the production of prototypes and smaller series of products
- Enables 5-axis machining
CNC-lathe
Gildemeister CTX300
- Workpieces with a diameter of up to 250 mm
- Possibility of using rotary tools, which allows drilling and milling on the lathe
CNC-lathe
Spinner EL310 with bar feeder
- Machining of pieces with a diameter of up to 260 mm and a length of up to 350 mm
- Production of serial product from rods with a diameter of up to 50 mm
CNC-lathe
MORI SEIKI SL15
- Machining of pieces with a diameter of up to 200 mm and a length of up to 400 mm
- Production of axes with a diameter of up to 40 mm
CNC-saw for cutting metals
DOALL CNC300
- Cutting bars with a maximum cross-section of 300 mm x 300 mm
- Maximum bar length 7 m
3D measuring machine
BROWN & SHARPE
- 3D measurements of products up to 400 mm x 400 mm x 300 mm
Machine for the production of grooves
KARL KLINK
- Production of grooves on drilled holes
- Maximum groove width 12 m